MODEL "HPB"
Heavy Duty Slider Bed Conveyor
Heavy Duty Slider Bed Conveyor
• Packing
• Inspecting
• Sorting
• Assembly
• Testing
• Transporting
• Inspecting
• Sorting
• Assembly
• Testing
• Transporting
Applications / Features:
STANDARD SPECIFICATIONS
Belt - 12", 14", 18", 24", 30" and 36" Black PVC 120 Belt.
Bed - 12 gauge powder painted formed steel, 6-1/2" deep. Bed sections are 5 feet and 10 feet long, bolted together with spice plates and floor supports.
Tail Pulley - 4" diameter for belt widths through 30" wide. 6" diameter for 36" and wider belts. 4" diameter pulley has 1-3/16" diameter shaft, 6" diameter pulley has 1-7/16" diameter shaft turned down on ends to 1-3/16" diameter.
Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft.
Snub Roller - 2-1/2" diameter directly behind drive pulley; 2" diameter at tail pulley.
Return Roller - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - Adjustable 31" to 45" from floor to top of belt.
Take-Up - 6" long screws located at tail pulley to provide belt tension.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per lineal foot of conveyor - 100 lbs. Not to exceed Load Capacity Chart (see catalog page).
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - 12 gauge powder painted formed steel, 6-1/2" deep. Bed sections are 5 feet and 10 feet long, bolted together with spice plates and floor supports.
Tail Pulley - 4" diameter for belt widths through 30" wide. 6" diameter for 36" and wider belts. 4" diameter pulley has 1-3/16" diameter shaft, 6" diameter pulley has 1-7/16" diameter shaft turned down on ends to 1-3/16" diameter.
Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft.
Snub Roller - 2-1/2" diameter directly behind drive pulley; 2" diameter at tail pulley.
Return Roller - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - Adjustable 31" to 45" from floor to top of belt.
Take-Up - 6" long screws located at tail pulley to provide belt tension.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per lineal foot of conveyor - 100 lbs. Not to exceed Load Capacity Chart (see catalog page).
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
