STANDARD SPECIFICATIONS
Capacity - Blade -150 Ibs., 1-3⁄8" roller - 50 Ibs., 1.9" diameter roller -150 Ibs. All are live load capacities @ 60 FPM.
Bearings - High capacity (2) bolt flange bearings.
Stop - 1-3⁄8" diameter x 18 gauge unplated steel roller for 1-3⁄8" conveyors. 1.9" diameter x 16 gauge galvanized steel roller for 1.9" x 2.0" conveyors.
Blade - 1⁄4" steel plate.
Position - Supplied normally down. Can be supplied normally upspecify.
Air Cylinder - 11⁄4"bore x 2" stroke double acting air cylinder to raise or lower stop.
Air Requirements - Minimum pressure 60 PSI, maximum 100 PSI. Free air consumption @ 60 PSI - .014 cu. ft. per cycle, @ 100 PSI - .022 cu.ft.
Valve - Single solenoid 4 way valve. 1⁄4" spring return- 20 NPT valve ports.
Electrical requirements - 120V, single phase, 60 Hertz. Current draw - .068 amps, or 24VDC.
Bearings - High capacity (2) bolt flange bearings.
Stop - 1-3⁄8" diameter x 18 gauge unplated steel roller for 1-3⁄8" conveyors. 1.9" diameter x 16 gauge galvanized steel roller for 1.9" x 2.0" conveyors.
Blade - 1⁄4" steel plate.
Position - Supplied normally down. Can be supplied normally upspecify.
Air Cylinder - 11⁄4"bore x 2" stroke double acting air cylinder to raise or lower stop.
Air Requirements - Minimum pressure 60 PSI, maximum 100 PSI. Free air consumption @ 60 PSI - .014 cu. ft. per cycle, @ 100 PSI - .022 cu.ft.
Valve - Single solenoid 4 way valve. 1⁄4" spring return- 20 NPT valve ports.
Electrical requirements - 120V, single phase, 60 Hertz. Current draw - .068 amps, or 24VDC.
MODEL "Air Operated
Blade / Roller Stop"
Blade / Roller Stop"
Installation Manual
Applications / Features:
• Air Operated Stops are used
where automatic line control
is required such as
assembly work stations,
shipping areas, etc.
• Can be mounted to
underside of models
138SR, 190SR, 20SR, 190CAP,
138CAP, 190ZPA.
where automatic line control
is required such as
assembly work stations,
shipping areas, etc.
• Can be mounted to
underside of models
138SR, 190SR, 20SR, 190CAP,
138CAP, 190ZPA.
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
