STANDARD SPECIFICATIONS
MODEL "251ACDA"
Heavy Duty Air Operated Sensor Roller Chain Driven Pallet Accumulating Conveyor
Heavy Duty Air Operated Sensor Roller Chain Driven Pallet Accumulating Conveyor
• Zero pressure accumulation
• Air operated
• Heavy duty construction
• Chain driven rollers
• Zone connections outside
frame for easy installation
• Air operated
• Heavy duty construction
• Chain driven rollers
• Zone connections outside
frame for easy installation
Applications / Features:
Frame - Heavy duty 7" deep x 4 gauge powder painted formed steel channel with heavy duty cross braces. Frames are bolted together with splice plates and floor supports.
Rollers - 2-1/4" diameter x 11 gauge steel rollers, grease packed and labyrinth sealed bearings, 11/16" hex shaft. Rollers are spaced on 4" or 6"centers, set 2-1/4" low.
Floor Supports - Adjustable 18-3/4" to 23-3/8" (HD-4) from floor to top of roller, for each end of conveyor and at each bed joint along with knee braces for each support. Supports on 5 foot centers, changes with zone length.
Drive - Located near center of conveyor length, shaft mount motor and reducer.
Drive Chain - RC #40 chain used for roller to roller connections, RC #60 chain drives each zone. Chains are totally enclosed by metal guards.
Accumulation Zones - Standard zone lengths are 60" long with a maximum of 30 zones per single drive. Each
zone is driven by an air clutch and controlled by a sensor roller.
Motor - 3/4 HP 230/460-3-60 TE motor.
Electrical Controls - 110/1/60 electric solenoid and air switch for discharge zone.
Conveyor Speed - 30 FPM constant roller speed.
Capacity - 4000 pounds maximum unit load. Total conveyor live load not to exceed Load Capacity Chart (see catalog page).
Speed Reducer - Heavy duty, sealed worm gear, C-Face.
Bearings - Sealed pre-lubricated with cast iron housings.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Rollers - 2-1/4" diameter x 11 gauge steel rollers, grease packed and labyrinth sealed bearings, 11/16" hex shaft. Rollers are spaced on 4" or 6"centers, set 2-1/4" low.
Floor Supports - Adjustable 18-3/4" to 23-3/8" (HD-4) from floor to top of roller, for each end of conveyor and at each bed joint along with knee braces for each support. Supports on 5 foot centers, changes with zone length.
Drive - Located near center of conveyor length, shaft mount motor and reducer.
Drive Chain - RC #40 chain used for roller to roller connections, RC #60 chain drives each zone. Chains are totally enclosed by metal guards.
Accumulation Zones - Standard zone lengths are 60" long with a maximum of 30 zones per single drive. Each
zone is driven by an air clutch and controlled by a sensor roller.
Motor - 3/4 HP 230/460-3-60 TE motor.
Electrical Controls - 110/1/60 electric solenoid and air switch for discharge zone.
Conveyor Speed - 30 FPM constant roller speed.
Capacity - 4000 pounds maximum unit load. Total conveyor live load not to exceed Load Capacity Chart (see catalog page).
Speed Reducer - Heavy duty, sealed worm gear, C-Face.
Bearings - Sealed pre-lubricated with cast iron housings.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Horizontal Powered
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
