STANDARD SPECIFICATIONS
MODEL "190MRA"
Motorized Live Roller Accumulator
Motorized Live Roller Accumulator
• Zero Pressure Accumulation
• Photo Eye Sensors
• 24VDC - Brushless Motors
• Quiet Operation
• Easy Installation and Wiring
• Low Profile Design
• Photo Eye Sensors
• 24VDC - Brushless Motors
• Quiet Operation
• Easy Installation and Wiring
• Low Profile Design
Applications / Features:
Bed - 15", 21", 27", and 33" wide between rails, 7" deep x 1-1/2" x 12 gauge powder painted, formed steel channel frame, bolted together with butt couplings and floor supports.
Rollers - 1.9" diameter x 16 gauge galvanized steel rollers with 7/16" hex axle and ABEC-1 precision bearings. Double grooved rollers spaced on 3", 4", or 6" centers are slave driven by urethane "O" rings from motor rollers. Rollers are set low in conveyor frame to provide guard rails both sides.
Motor Rollers - Motor rollers are 24VDC, brushless type for long life and high output. Each motor roller has the capability to provide accumulation, dynamic braking, slug unload, reverse and run at variable speeds as standard. Motor roller only runs only when necessary and remains in sleep mode at all other times.
Sensors - Diffused photo eye mounted to side of conveyor frame to detect product presence. Photo eyes operate on 24VDC.
Accumulation Zones - Standard zones are 24", 30", or 36" long. Zone length must be equally divisible by roller centers.
Power Source - Each complete motor roller conveyor comes with a properly sized 24VDC power source and motor card. Power source requires 115VAC input.
Floor Supports - Adjustable 30" to 44" from floor to top of rollers. One support provided at end of conveyor and at each bed joint.
Conveyor Speed - Standard conveyor speed range is 60 to 90 FPM. Other speeds available.
Bearings - Tread rollers, pre-lubricated ABEC-1 precision bearings.
Capacity - Motor roller can handle product weights up to 150lbs. depending on product type and conveyor speed.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Rollers - 1.9" diameter x 16 gauge galvanized steel rollers with 7/16" hex axle and ABEC-1 precision bearings. Double grooved rollers spaced on 3", 4", or 6" centers are slave driven by urethane "O" rings from motor rollers. Rollers are set low in conveyor frame to provide guard rails both sides.
Motor Rollers - Motor rollers are 24VDC, brushless type for long life and high output. Each motor roller has the capability to provide accumulation, dynamic braking, slug unload, reverse and run at variable speeds as standard. Motor roller only runs only when necessary and remains in sleep mode at all other times.
Sensors - Diffused photo eye mounted to side of conveyor frame to detect product presence. Photo eyes operate on 24VDC.
Accumulation Zones - Standard zones are 24", 30", or 36" long. Zone length must be equally divisible by roller centers.
Power Source - Each complete motor roller conveyor comes with a properly sized 24VDC power source and motor card. Power source requires 115VAC input.
Floor Supports - Adjustable 30" to 44" from floor to top of rollers. One support provided at end of conveyor and at each bed joint.
Conveyor Speed - Standard conveyor speed range is 60 to 90 FPM. Other speeds available.
Bearings - Tread rollers, pre-lubricated ABEC-1 precision bearings.
Capacity - Motor roller can handle product weights up to 150lbs. depending on product type and conveyor speed.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Installation Manual
FAD
